This model ships in two versions: a regular unit that comes with a DIN-rail transformer for professional installation, or you can buy the doorbell with a plug-in adapter and install it yourself. Loop one doorbell wire around each of the screw terminals on the rear of your Ring doorbell, then tighten the terminals to secure. If your doorbell wires are too short to reach your new Ring doorbell, you can attach the included wire extenders using the included wire nuts. This can be done by turning off the mains power switch, or by turning off the power coming into your home at your electric meter.

Follow the sound to find your chime and make a mental note of the location. We'll return to your chime soon. So read on to find out all you need to know from this Ring Video Doorbell Pro 2 review. Ring Video Doorbell Pro 2 price and availability To remove, spread the two sides of the housing outwards, and push the transformer unit up from below.Ring’s real strength lies in its ecosystem, with the doorbell working well with the alarm and any other cameras you have. No other manufacturer comes close to offering the same range of products, all tied together with one cheap monthly subscription. Installation by a qualified electrician may be required in your area. Refer to your local laws and building codes before performing electrical work; permits plus professional installation may be required by law. It’s a powerful combination, as motion has to take place both inside a motion zone and within the range you’ve set. It makes the Ring Video Doorbell Pro 2 the most powerful device to manage, and I’ve had far fewer notifications and recordings since installing this model.

The pre-roll on this model works well, showing you a short color clip of the person approaching your door before they actually press the bell. This six-second loop isn't that clear but it can be really helpful as you can see the person where they might otherwise hit the bell and run, leaving you missing who it actually was. App Your Ring video doorbell is compatible with doorbell systems supplying 16-24 volts VAC at 50 or 60Hz, 40 VA max, The AC connector is a Class 2 energy source. Your Video Doorbell Pro 2 is designed to replace an existing doorbell button and gets its power from the doorbell system. Ring your existing doorbell and listen for the chime. If it rings, you know your existing doorbell system is working. If your Ring Doorbell has never been set up, the front light will sin, indicating that your Ring has entered setup mode. For your safety, only use an existing doorbell transformer within the range specified below or compatible Ring accessories to power your device.

Message to Community

You can also trigger Alexa Routines when motion is detected or the doorbell is pressed, adding to the power of the camera. Given how flexible Alexa routines are, you can really do a lot here – say, turning on a hall light when someone presses the doorbell. Overall, the Ring Video Doorbell Pro 2 is the best smart doorbell you can currently buy. Its image quality is superb, and it’s easy to set up and use. The new 3D Motion Detection feature, combined with traditional activity zones, means that you’ll largely only receive important notifications: a powerful and genuinely useful upgrade.

recommended-use": "Slim, convenient and always powered on, our most affordable wired Video Doorbell.", Run the cable down from the outlet to your molding and then choose a path to your Video Doorbell Pro.Locate the output cables that are connected to your doorbell. These may be connected to the terminals marked ‘output’, ‘8-12 V AC’ or a similar low voltage. Disconnect these cables and put them to one side. The feature works pretty much perfectly and, whereas other video doorbells often miss the initial approach to the house down the garden path (I do wish my life was more exciting), the Ring Video Doorbell 2 captures every riveting second. It’s a neat feature, but I’d also like the option to choose a response on the fly (with a default going out after the timeout), so I could target the reply to the person at the door. The Corner Mount can angle your Ring Video Doorbell to improve motion detection and provide a better view. Note: If you're installing on wood or siding, you can skip this step. Step Twelve - Connect the doorbell wires

Thanks to the wide support for the Ring ecosystem, and a huge range of partner products, the Ring Video Doorbell Pro 2 is the best smart doorbell available today – but it’s expensive, and loses the option to ring an internal chime. Design and installation If you're setting up with a Plug-In Adapter, you can choose to temporarily connect your doorbell to your home wifi network before physically installing your device. Traditional DIN Rail transformers are 35 mm wide. The Ring DIN Rail Transformer can be removed from its housing to be a more compact 17.5 mm. There’s still no Google Assistant support, so if you run Google Home devices, then you’ll probably want to look elsewhere. If you go for the first option, the main downside is that it will no longer be compatible with a traditional doorbell chime; you’ll have to bypass it completely. I’m not quite sure of the reasons that Ring has made this change, since a regular doorbell chime is a reliable way to receive notifications that don’t rely on your Wi-Fi working.

Connect the previously disconnected 230V high voltage line (brown) and neutral (blue) cables to terminals L & N on the bottom of the transformer.(ensure these are going into the correct input terminals). Once the doorbell is placed, you can use the test feature to set the range of the motion detection, cutting it off at the point your property ends. The idea is that you can get the doorbell to ignore motion at the end of your front garden, such as people just walking past. Given that this is a doorbell, that’s what I’d expect, and footage is usually good enough to find a still frame that clearly identifies someone. Even so, I think that the Arlo Video Doorbell just edges it in terms of overall quality.