Pro-Line Diesel Particulate Filter Purge washes out the soot dissolved by the cleaner and distributes it in the diesel particulate filter so that it can be burned off with normal regeneration. Dann habe ich die Kiste eine halbe Std im Leerlauf laufen lassen und anschließend eine Probefahrt ( im Norlauf ) gemacht.

The total amount of Pro-Line Diesel Particulate Filter Cleaner (1 l) is sprayed directly onto the surface of the particulate filter in several intervals of 5 – 10 seconds with a break of 5 – 10 seconds in each case at an operating pressure of 6 – 8 bar. Then flush the particulate filter with the total amount of Pro-Line Diesel Particulate Filter Cleaner (500 ml). Highly effective fluid for cleaning clogged passenger car diesel particulate filters when installed.Cleans and regenerates dirty and blocked diesel particulate filters by reducing the combustion temperature of particulate, which means that it combusts earlier and faster at a lower engine temperature.

Can you spray it down the pressure sensor pipe and if so which one, which is the upstream, otherwise where? Insert the tube of the aerosol nozzle in the opening with the spraying direction towards the filter. Eventually the filter becomes blocked, the orange warning light with the diesel particulate filter symbol lights up on the dashboard and the car must be taken to the garage.For rinsing the diesel particulate filter (DPF / FAP) in installed condition after cleaning with Pro-Line Diesel Particulate Filter Cleaner. The filter captures incompletely combusted fuel (soot) from the engine that would otherwise end up in the environment. The combination of platinum and cerium ensures, in the first instance, significantly improved regeneration and cleaning of the diesel particulate filter compared with conventional cleaners. With this method the cleaner goes only where it needs to go, there it does the job and then leaves through the tailpipe.