There are several ways to do this, and this section will outline each of them in detail. Rejuvenate’s Recommendation: Alkaline Floor Cleaner Similarly, if oils from other cleaners aren’t removed from the floor before applying Rejuvenate, the product won’t adhere properly. Some form of protection for your wood floors is always handy, right? After all, you’re reading this floor polish article in the hopes it will help you protect your floors. The satin formula is excellent for floors with a lot of imperfection. The satin finish is more natural and subtle, bringing out the grain patterns in your wood floors and working with flaws. It’s a much softer result than the high gloss of the other options. You don’t need to mix the formula or dilute it in any way. It’s ready to use straight out of the bottle.

If you are adding an additional layer of protection, it can still be worth using one of these floor finishes. Whichever method you choose, always test the cleaning solution/floor stripper on a small, inconspicuous area of your floor. Even if a product is advertised as safe for the type of floors in your home, there’s always a chance that it will react unexpectedly when you apply it. Always allow the floor to dry completely before evaluating the results. Sometimes it looks like it’s working when the floor is wet, but not after it dries. Clean the Mop You don’t need to sand beforehand because it rests on top of your existing floor’s finish. As it dries, it creates a protective layer that helps prevent damage from UV rays (such as those from your window) and keeps wear and tear from shortening the life of your floor. How Do I Apply It? If that doesn’t work, move on to one of the alternative methods: dish soap and water, vinegar, Windex, or ammonia. As a general rule, if you have wood that is already very yellow (pine, for example), a non-yellowing finish should be the way to go.

The natural wax polishes tend to be the easiest to apply in terms of learning curve but require more elbow grease as you need to buff them to get a sheen.

Similarly, after applying Rejuvenate All Floors or Wood Restorer, let it dry thoroughly before walking on the floor. If you walk on it too soon, you can cause smudges and leave behind dust and debris that will alter the floor’s appearance.Allow it to dry completely. Make sure no one has access to the room before it dries and that you have an exit strategy after application. So which floor polish you use greatly depends on the wood you have and can greatly change the look of your wood floors if you use the wrong one! Consider a polish that offers extra protection It’s essential to restore your floors every so often to counteract wear and tear. Finished floors can look dull and dingy over time with foot traffic, pet nails, moving furniture, and other types of wear. Dirt and dust scratch the surface and the finish wears out over time. Clean your mop periodically as you remove the Rejuvenate from your floors. Otherwise, the product will collect on the mop and undo your hard work. Don’t Soak Wood Floors

Whatever you decide, it’s essential that you’re taking steps to keep your floors protected. UV light from windows can fade the finish across your floor without you even realizing it. Scratches from pet paws and wear and tear from children can ruin the finish of your floors. The representative recommended using an alkaline-based stripper or cleaner from the local hardware store. The film left behind by Rejuvenate Floor Restorer won’t permanently ruin hardwood floors, but harsh cleaners like Zep Floor Stripper and ammonia can. Note: Always read and follow the instructions on the label before applying Zep or any other cleaner to your floors. The steps can vary by brand and product. Alternative Method 1: Dish Soap and Warm WaterNatural wax polishes respond really well to buffing. The more you buff, the more of a naturally beautiful sheen your floor will have. It’s a polyurethane based formula that goes on easily. It’s non-toxic and helps to fill in scratches and dents in your floor. It smooths over imperfections without creating a layer of gloss. Be careful, though; some floor finishes don’t interact well with others. Don’t worry; they won’t have a fight, but the floor finish you use may begin to peel up the old layers of finish. So, always test the finish you’re about to use in a spot you’ll never see. There are some wooden floor polishes that can turn your wood extremely yellow from the get-go. If your floors are already quite yellow, these can make them a lot worse.