With the lid and ring flat to the top of the toilet pan and the hige and hinge plate in the same position, lower it down on to the pan, slotting the studs through the fixing holes.

toilet seat spares. Hinges. Bolts. Fittings Packs etc. WC toilet seat spares. Hinges. Bolts. Fittings Packs etc.

The method is to fit the rubber grommet into the pan holes and tighten the screw that engages with the nut and as one tightens, the nut is drawn up by the screwing action that expands the rubber grommet, making it tighten within the hole in the pan. In pretty much all cases your toilet will be shaped to fit a particular type of seat so replacing a toilet seat will have to be done on a like-for-like basis so that you can be sure that it fits correctly. Fixing (domed, stainless washers, fixing nut and bolt): Connects to the hinge plate and fixes everything to the toilet panOnce it’s out of the way you can then thoroughly clean the whole area before refitting your new seat. Fitting a New Toilet Seat Once finished you should also clean any and all tools that you have used. Tools Needed to Change a Toilet Seat

Ideal Standard Seat Hinges - My Toilet Spares Ideal Standard Seat Hinges - My Toilet Spares

Altering the location of the fixing bolt in the hinge plate can move the position of the hinge forward A tip you may find useful is that, having got the adjustment correct in step 2, before securing the seat to the pan, note the positions and then unscrew the main adjusting screw and the studs and coat the threads with a proprietary thread seal. The first step is to screw the short studded sections into the base of the hinge plate. The one thing that you need to ensure is that if there are a range of different holes in the base, that you screw the stud into the right hole. However if the hinges you have feature adjustment then they will need to be positioned and adjusted correctly so the seat sits in exactly the right place on top the pan before the screws are tightened. As there are many different types of adjustable top fixing hinges you will need to refer to the manufacturers instructions included with the kit on how to adjust correctly.

How to Measure a Toilet Seat

D-Shape: These seats tend to be modern so suit modern bathrooms and toilets and they are a little larger than more traditional toilets The big advantage that the top fixing method has is that they are much easier to fit and also maintain. Depending on the type of fixings your seat uses will depend on how they are removed. For top fixings, either remove the ring and lid (if you need to) or flip up the hinge plate cover to reveal the bolt or screw head. Using the correct tool, unscrew the bolt or screw and repeat for the other side. Make sure the fit is good and that the hinge plates are both pointing in the same direction and the seat is sitting evenly around the perimeter of the toilet bowl. Step 5 – Fit Washer and Nuts These kits are even easier to fit as all you have to do is insert the fixing plugs into the pan, position the seat in place and ensure it’s uniform to the top of the pan and then insert the screws and screw them up and you’re finished. Tips for Fitting Non-Standard Toilet Seats

Stainless metal L shape toilet seat hinge replacement pack Stainless metal L shape toilet seat hinge replacement pack

Aside from the 2 most common types of toilet seat fixings stated above there are several others, although not that common, if the methods above don’t seem to fit the seat you have then read on below as you may have one of these. Toilet Seat with Hinge Bar and grub Screws This is a very good and well thought out solution for this eventuality and saves having to withdraw the pan from the wall, where re-sealing is difficult.Fine adjustments can be made by rotating the hinge plate; this ensures that the fixing bolts can be adjusted so both will go into their respective holes in the toilet bowl If you have metal fixings these can be a little different and may need fitting from below. If you have any doubts then refer to the manufacturers fitting instructions that came with the kit. Step 2 – Position and Fix Hinges The fixing bolt or washer has failed – this sometimes occurs with cheaper seats with plastic fixing bolts. They can be tightened but typically it will fail again. Best solution is to replace it Finally, slip the vinyl or plastic washer over the stud and slide it up to the hinge plate. This sits between the hinge plate and pan and protects the pan from scratching. Step 2 – Adjust the Hinges Once the nuts holding the seat in place are removed you can simply lift it away and free from the pan.